Quantity

Number of copies of your document

A4 size

Final size (after finishing) is A4

A3 size

Final size (after finishing) is A3

A2 size

Final size (after finishing) is A2

A1 size

Final size (after finishing) is A1

A0 size

Final size (after finishing) is A0

Size differs

You can specify a different size here (width x height in mm). You enter the final size that must remain after trimming (without bleed) or finishing (folding, binding, etc.) , for folded products you must fill in the size fo

Round (diameter)

You can specify the diameter, from small to large. Enter the final size which remains after cropping, without bleed.

Display cardboard 2mm

Two-sided ironed matt cardboard in white. This material is made of cardboard and 100% recyclable. As the cardboard is not water-resistant it is only suitable for indoor use. With a pen / marker you can easily write on the surface. You can't fold or crease the material.

Environment: 100% recyclable cardboard, FSC certified
Properties: 2mm whole grain cardboard ironed on both sides, resistant to UV radiation, not water resistant

Foampanel

Foampanel has a photographic topcoat and therefore the photo's look very sharp. The material is light and can be printed both one- and double-sided. The material can bend a little bit because of temperature changes, with Dibond this is not the case. Smooth surface.

Properties: 5mm lightweight sandwich panel, foamed polystyrene, both sides polypropylene top layer, shortly water resistant

Channel plate 3mm

Sturdy plate for estate agent signs. Semi-gloss white and smooth in structure (so no stripes in contrast to the channel plates of other suppliers). The sides are open in structure and the bubble channel is visible here. Is easy to cut, score and fold.

Gewijzigd per 07-08-2024
Wij zijn overgestapt op een ander merk & type kanaaplaat, dit is nu een fractie dunner maar wel met als voordeel dat het oppervlakte glad is (je ziet geen banen / ribbels meer).

Environment: 100% recyclable (polypropylene)
Properties: 3mm polypropylene, consists of 2 plates with a network of channels in between, resistant to UV radiation, water and chemicals

Forex 5mm

Forex is foamed PVC material and therefore very firm. It is suitable for outdoor activities and can be printed single- and double-sided. Smooth and firm surface.

Properties: 5mm foamed PVC, water-resistant

Dibond 3mm

Dibond is a top-quality, light weighted aluminum panel with a very high rigidity. These panels are made of core of black polyethylene with a topcoat of aluminum of 0.3mm on both sides.

Properties: Black polyethylene core with a top layer of aluminum of 0.3 mm on both sides, UV resistant, water-resistant

Re-board 10mm

Re-board is constructed as a kind of sandwich construction with a double-sided white top layer. It is 100% recyclable and extremely strong.

Environment: 100% recyclable
Properties: Cardboard sandwich construction with double-sided white top layer, not water-resistant

Re-board 16mm

Re-board is constructed as a kind of sandwich construction with a double-sided white top layer. It is 100% recyclable and extremely strong.

Environment: 100% recyclable
Properties: Cardboard sandwich construction with double-sided white top layer, not water-resistant

Plexiglass 3mm

Crystal-clear acrylic panel where the print on the back is printed in a mirror image, this mirroring is automatically provided by our software. After this imprint, it is covered with a white coating to prevent it from shining through. You cannot fold or crease this material.

Properties: crystal clear acrylic panel 3mm

Single sided printing

The paper will be printed on 1 side

Double sided printing

The paper will be printed on both sides. When you submit multiple files, they will be merged and printed as a whole.

Basic cut out

The document will be cut out on the chosen size

Contour cut out

Your document will be cut on the contour lines. Please note, this is an "expert" option: it is fairly complex to provide this properly in your file. Deliver your document with a separate layer for the contour lines. Look here for instructions.

The contour lines are visible as a blue line in the preview. If the contour lines have not been delivered correctly, a message will appear. Don't see an error? Then you did well!

Complex figures (many sharp corners/very small forms) are difficult to produce and therefore this is not possible. The contourline can only be 1 figure. It is therefore not possible to have a large panel with multiple loose figures cut out of it

Folded in the middle

The document will be folded in the middle. The chosen size will be folded in the middle and is therefore half the size when closed.

Panel materials can be fold only one way, this is always a fold backwards. So the front will stay visible.

Stand-up (with hanging option)

Stand-up to freely put up or hang a firm panel or card. Depending on the chosen size the matching stand-up will be delivered. The stand-up is multi-functional, it can be used as a footrest but also offers the possibility to hang with one punch hole.

Table stand (stainless steel)

You will receive 2 oval-shaped silver-colored 'feet' which are easy to attach (no mounting holes are required, but the board must be at least 3mm thick).

You mount the feet at the bottom of the panel and clamps by means of the lock nut (note that you must turn this in the opposite direction than you are used to). For sufficient strength, we recommend this up to A3 size.

Velcro fastener circles

With the self-adhesive Velcro circles you can easily mount the poster on smooth surfaces without leaving permanent damage. The Velcro circles are white in color and self-adhesive. You will receive a set for the 4 corner points (4x soft circle, 4x coarse circle).

Double-sided tape (4 strips)

Double-sided tape is suitable for mounting on tiles, glass, wood and most plastics (the smoother, the better the adhesion) with a maximum load of 2kg. For optimal adhesion, it is important that the surface is free of grease and dust. You order them per 4 strips of 2x5cm.

Spacer with suction cap

A simple spacer with suction cap to place panels on smooth surfaces (only for indoor use). Panel thickness can be a maximum of 8 mm. The screw-thread of 4 mm diameter is 10 mm long on which a white plastic knurled bolt secures the plate. The suction cup is transparent and has a diameter of 50 mm. You order them per set of 4 pieces (so if you order a quantity of 1 you get 1 bag of 4 spacers). If you order this spacer in the order form of the panel, we will drill the holes (25 mm from the edge), if you do not want holes, you can also order the spacers separately.

Stainless steel spacer

Luxurious stainless steel spacer for indoor and outdoor use. This spacer has a head of 15mm, the distance to the wall is also 15mm. Suitable for a plate thickness of 2-10mm, the drill hole is 9.5mm. You order them per set of 4 pieces, including Phillips screws and plugs (so with edition 1 you get 1 bag of 4 spacers). If you order this spacer in the order form of the panel, we will drill holes (15mm measured from the center of the hole to the edge). If you do not want this, you can also order the spacer separately.

Metal mounting plate

With this mounting plate you can easily and quickly hang your panel thanks to the self-adhesive system. It is suitable for indoor- and outdoor use with a maximum load of 6kg. 1 set consists of one mounting plate (100x100mm), screw 4x30mm, nylon plug 6x30mm, wall hook, 2x self-adhesive transparent spacers, alcohol wipes and instruction.

Note: The plate must remain under pressure for 24 hours before the sign is hung.

Equipped with holes

We automatically place holes in your document with a fixed distance and diameter. Check the preview to see whether these holes are not distracting in your design.

4 holes in each corner
We place a drill hole with a diameter of 5 mm in each corner. These holes are located at a distance of 15 mm from the edge, measured from the center of the hole to the edge.

2 holes in the top corner
We place a drill hole with a diameter of 5 mm in the top 2 corners. These are located at a distance of 15mm from the edge (measured from the center of the hole to the edge).

4 holes in the middle
We place four drill holes in the middle. These holes, with a diameter of 6 mm, are placed horizontally with a mutual distance of 10 cm. They are located 18 mm from the top and bottom edges, measured from the center of the drillhole.

2 holes in the center (horizontal)
We place 2 drill holes horizontally in the center of the board. These holes, with a diameter of 5 mm, are centered and have a mutual distance of 10 cm.

2 holes in the middle (vertical)
We place two vertical drill holes in the center of the board, each with a diameter of 5 mm. These holes are centrally placed above each other and are located 18 mm from the edge. The distance between the drill holes varies depending on the size of the board.

Standard document check

The standard check sees whether your file has been correctly submitted for printing. This is an automated check that looks at the points below:

Document scaling
Bleed area (link to page bleed)
Rotate pages correctly

Extended document check

With this option you opt for certainty and we manually check the document. We recommend this option for large orders, presentation materials, complicated documents or if you have doubts about the document. We check various points depending on the selected product:

Appropriately scaled
Pages rotated correctly
Resolution
Margins (text on safe distance from edge, see uitleg)
Finishing (if applicable)
Continuous pages (if applicable)

Pick-up in Amsterdam (at Print&Bind or pick-up point)

You can pick up the order from 16:00h (or 10:00h urgently) at Print&Bind in Amsterdam Sloterdijk, our location is easily accessible by car (A10) or public transport (metro stop Isolatorweg)
We keep your order for a maximum of 2 weeks.

Opening hours:

Monday till Thursday	08:00 - 21:30
Friday	08:00 - 18:00
Saturday till Sunday	09:00 - 18:00

In addition, pick up at one of the pickup points in Amsterdam is possible from 6 p.m.

Your order will be held for a maximum of one week at the location, so do not wait to long to pick up your package.

Send by post

Order will be delivered by letterbox or parcel post (depending on the size). There are various possibilities like:
- Pick up at PostNL location 16:00h
- Pick up at PostNL location 8:30h
- Evening delivery
- Morning delivery 10.00h
- Sunday delivery
- International
Read more about it on the page delivery methods

Manufacturing costs urgent

With urgency your order will be processed the same day (if your order before 1 pm). With budget you will get a discount but the production will take longer (4 days).

Urgent order: +20%
Budget: -10%

Quantity
Document	Add file Design online
	Submission conditions
Size	A4 (210x297)
	A3 (297x420)
	A2 (420x594)
	A1 (594x841)
	A0 (841x1189)
	B2 (500x707)
	B1 (707x1000)
	Vierkant (eigen formaat)
	x mm
	Round (custom size)
	mm
Material	Display cardboard (2mm)
	Foam panel (5mm)
	Channelplate (3mm)
	Forex (5mm)
	Dibond (3mm)
	Re-board (10mm)
	Re-board (16mm)
	Plexiglass (3mm)
Printtype	One-sided
	Double sided
Finishing	Basic cut out
	Contour cut out
	Round corners

Fold	Unfolded
	Middle fold
Assembly	None
	Easel (stand + hanging option)
	Table stand (stainless steel) new
	Velcro fastener circles
	Double-sided tape (4 strips)
	Suction cap spacer
	Stainless steel spacer
	Metal mounting plate
	Equipped with holes

Document check	Default
	Extended

Delivery method	Pick up
	Post
	Urgent order Budget (4 days)
1000

Foamplate panels configurationchange