Namebadge orderchange

You can order separate materials here, these are always unprinted.
Number
Assembly
 
 
 
 
 
 
 
 
 
 
Size
Delivery method
 
 
1000

Double-sided tape (4 strips)

Double-sided tape is suitable for mounting on tiles, glass, wood and most plastics (the smoother, the better the adhesion) with a maximum load of 2kg. For optimal adhesion, it is important that the surface is free of grease and dust. You order them per 4 strips of 2x5cm.

Spacer with suction cap

A simple spacer with suction cap to place panels on smooth surfaces (only for indoor use). Panel thickness can be a maximum of 8 mm. The screw-thread of 4 mm diameter is 10 mm long on which a white plastic knurled bolt secures the plate. The suction cup is transparent and has a diameter of 50 mm. You order them per set of 4 pieces (so if you order a quantity of 1 you get 1 bag of 4 spacers). If you order this spacer in the order form of the panel, we will drill the holes (25 mm from the edge), if you do not want holes, you can also order the spacers separately.

Stainless steel spacer

Luxurious stainless steel spacer for indoor and outdoor use. This spacer has a head of 15mm, the distance to the wall is also 15mm. Suitable for a plate thickness of 2-10mm, the drill hole is 9.5mm. You order them per set of 4 pieces, including Phillips screws and plugs (so with edition 1 you get 1 bag of 4 spacers). If you order this spacer in the order form of the panel, we will drill holes (15mm measured from the center of the hole to the edge). If you do not want this, you can also order the spacer separately.

Metal mounting plate

With this mounting plate you can easily and quickly hang your panel thanks to the self-adhesive system. It is suitable for indoor- and outdoor use with a maximum load of 6kg. 1 set consists of one mounting plate (100x100mm), screw 4x30mm, nylon plug 6x30mm, wall hook, 2x self-adhesive transparent spacers, alcohol wipes and instruction.

Note: The plate must remain under pressure for 24 hours before the sign is hung.

Wooden base (beech)

Multifunctional card holder made of beech wood. Present your photos, menus or price tags in a "natural" way. The slot is 2mm and suitable for all sturdy paper types or display cardboard.

Table stand (stainless steel)

You will receive 2 oval-shaped silver-colored 'feet' which are easy to attach (no mounting holes are required, but the board must be at least 3mm thick).

You mount the feet at the bottom of the panel and clamps by means of the lock nut (note that you must turn this in the opposite direction than you are used to). For sufficient strength, we recommend this up to A3 size.

Posterstrip

With these strips you can easily hang your poster flat against the wall. Contains a bottom and top strip.

Poster hanger wood

The wooden slats are equipped with magnets, making it very easy to change / place them. A complete set for 1 poster therefore has 4 slats, of which 1 has a suspension cord.

Note: The slats are 20mm high and therefore cover a small part of the design.

Velcro fastener circles

With the self-adhesive Velcro circles you can easily mount the poster on smooth surfaces without leaving permanent damage. The Velcro circles are white in color and self-adhesive. You will receive a set for the 4 corner points (4x soft circle, 4x coarse circle).

Stand-up (with hanging option)

Stand-up to freely put up or hang a firm panel or card. Depending on the chosen size the matching stand-up will be delivered. The stand-up is multi-functional, it can be used as a footrest but also offers the possibility to hang with one punch hole.

Namebadge

Transparent name badge in which you can insert a business card of 55x85mm. Provided with a pin and clip, will be delivered in protective foil.

Easel 140mm

Easel of 140mm, intended for panels with a height between 130-210mm.

Easel 200mm

Easel of 200mm, intended for panels with a height between 180-310mm.

Easel 290mm

Easel of 290mm, intended for panels with a height between 240-420mm.

Easel 400mm

Easel of 400mm, intended for panels with a height between 340-600mm.

Easel 570mm

Easel of 570mm, intended for panels with a height between 450-800mm.

A4 size

A3 size

A2 size

Final size (after finishing) is A2

A1 size

Final size (after finishing) is A1

A0 size

Final size (after finishing) is A0

Pick-up in Amsterdam (at Print&Bind or pick-up point)

You can pick up the order from 16:00h (or 10:00h urgently) at Print&Bind in Amsterdam Sloterdijk, our location is easily accessible by car (A10) or public transport (metro stop Isolatorweg)
We keep your order for a maximum of 2 weeks.

Opening hours:

Monday till Thursday 08:00 - 21:30
Friday 08:00 - 18:00
Saturday till Sunday 09:00 - 18:00

In addition, pick up at one of the pickup points in Amsterdam is possible from 6 p.m.

Your order will be held for a maximum of one week at the location, so do not wait to long to pick up your package.

Send by post

Order will be delivered by letterbox or parcel post (depending on the size). There are various possibilities like:
- Pick up at PostNL location 16:00h
- Pick up at PostNL location 8:30h
- Evening delivery
- Morning delivery 10.00h
- Sunday delivery
- International
Read more about it on the page delivery methods

Manufacturing costs urgent

With urgency your order will be processed the same day (if your order before 1 pm). With budget you will get a discount but the production will take longer (4 days).

Urgent order: +20%
Budget: -10%

Price and delivery date are calculated automatically

 Afloop  Text margin